The strongest bond between two 3D printed parts in the known universe. It's Science! Not Magic…
3D Gloop! is hands down the best adhesive for holding your PLA, PETG, and ABS/ASA prints together. No more messy epoxies, no more super glues & activators that don't work. With 3D Gloop! you get the strongest, most reliable bond of any adhesive on the market... a chemical weld that's typically stronger than the printed plastic itself.
Don't just take our word for it: check out what your favorite content creators think of 3D Gloop! curated creator-review playlist ⚠TBD — audit note: link curated videos, not a raw YouTube search
Part solvent cement. Part reactive glue. All science. Gloop!'s carrier solvents gently dissolve the surface of your print, then its monomer complex cures and crosslinks directly INTO the plastic as the solvent evaporates. You're not sticking two parts together... you're welding them into one part. That's why a proper Gloop! joint outlasts the plastic around it, and why super glue (a weak mechanical bond wearing a lab coat) never stood a chance.
SAND. SLATHER. SQUEEZE. Clamp for 15 minutes, full POWER in 24-ish hours. That's the whole ceremony... and when you're ready to get the most out of your Gloop! (hiding seams, big prints, mixing materials), the Scientists wrote you a complete training program.
3D Gloop! is not your normal adhesive... it took many iterations and a LOT of science to put an end to the most frustrating part of 3D printing: parts that won't stay together. Run a pull test and watch the plastic give up before the weld does.
And it's not just Gloopies who trust it. 3D Gloop! bonds parts in automotive prototyping, defense & aerospace, medical modeling, and large-scale architecture... places where "it came apart" is not an acceptable sentence.
We know once you try 3D Gloop!, your 3D printing experience will never be the same. And that's a good thing!
Every bottle of Science Sauce is formulated, synthesized, bottled, and shipped from our 10,000 sq. ft. factory in East Alton, Illinois. Bootstrapped from an 800 sq. ft. basement, built without a dime of venture capital, and now rebuilding American manufacturing, one molecule at a time.
Oops, did we type 4D? Clearly we meant 3D, there are DEFINITELY no 4th+ dimensional beings involved with this company! Or are there?
Andrew Mayhall and Andrew Martinussen are the only-slightly-evil geniuses behind the wonderful world of 3D Gloop! …Under the watchful eyes of the Robot Overlords, of course.
They stumbled upon the oh so coveted Science Sauce known as 3D Gloop! while conducting laboratory experiments to create bigger, better, faster, stronger, and more out-of-this-world contraptions.
The Robot Overlords were pleased. (Woo Hoo!)
The Andrews are both passionate, multi-disciplined engineering aces who dove headfirst into 3D printing in 2011. They've been one-upping each other ever since and you get to reap the benefits!
3D Gloop! officially started in 2018 with a successful Kickstarter campaign (the Beancounters were thrilled to deliver on time too!). You loved it and they loved you for loving it and you love them for loving you for loving it and…ahem, well anyway…
These mad scientists aim to create for you the most wonderful and practical Science Sauce ever to enter our universe (or any other known universe, for that matter).
So join us! Go forth and print all the things! Gloop the pieces together, Gloop the world!